Hempel Floor Coatings
Multi-layer epoxy and decorative flooring systems for the ultimate protection of concrete floors.
Protection That Starts With the Right Specification
Hempafloor is Hempel’s range of multi-layer flooring systems and coatings for concrete. It was developed from Hempel’s long experience protecting assets in marine and protective coatings, and it is designed around durability and life-cycle cost — reducing how often a floor needs to be redone.
The range covers everything from thin sealers and primers through to heavy-duty screeds, and from plain industrial finishes to decorative flake and quartz floors.
car parks, warehouses, factories, workshops, stairs, racetracks, asphalt marking and aircraft hangars.
A Floor Is a System, Not a Coat of Paint
Why the Right Floor System Matters
Traffic and abrasion
Forklifts, pallet trucks and foot traffic wear a floor differently. The system must match the actual load.
Chemical exposure
Oils, cleaning agents and process chemicals attack the wrong coating quickly.
Hygiene requirements
Food, pharmaceutical and healthcare areas need surfaces that resist microbial growth and clean easily.
Safety
Wet or oily areas need a controlled anti-slip finish, not a high-gloss one.
Preparation Comes First
Every flooring system needs proper surface preparation before application. No product — including Hempafloor — can compensate for a poorly prepared surface. Hempafloor's performance depends heavily on the condition of the concrete it is applied to.
| Step | Title | Text |
|---|---|---|
|
01 |
Inspect the substrate |
Assess the concrete’s general condition and decide the best preparation method for the required surface profile. |
|
02 |
Remove weak concrete |
Take out and replace any non-durable concrete. |
|
03 |
Decontaminate |
Clean the concrete surface of oils, grease and other contaminants. |
|
04 |
Create the profile |
Roughen the surface to the profile the coating system needs. |
|
05 |
Repair irregularities |
Fill and level cracks, holes and surface defects. |
Hempafloor Products
A complete range from primer through to finish, plus fillers, screeds and anti-slip aggregate.
Hempafloor Prime 100
Two-component, solvent-based epoxy primer with strong sealing properties
Excellent penetration; seals absorbent concrete; long pot life
Hempafloor Prime 420
Two-component, solvent-free, high-build epoxy primer
Good penetration; odour-free; brush or roller application
Hempafloor Traffic 150
Water-based, self-priming, two-component epoxy paint
Can be applied on damp surfaces; good chemical resistance; suits light traffic
Hempafloor Traffic 300
Two-component, solvent-based epoxy paint for medium traffic
High abrasion and chemical resistance; high solids; wide colour range
Hempafloor Traffic 320
High-build, two-component, solvent-free polyamine epoxy floor coating
Excellent mechanical properties; high abrasion and chemical resistance; low odour, LEED-compliant on VOC
Hempafloor Traffic 520
High-build, two-component epoxy paint for heavy traffic
Outstanding mechanical properties; exceptional chemical resistance; odour-free
Hempafloor Anti-Microbial 500
Two-component, high-build, solvent-free epoxy with enhanced hygienic properties
Inhibits microbial growth on the surface; outstanding mechanical properties; high chemical resistance
Hempafloor Self-Level 200
Self-smoothing, solvent-free, three-component epoxy system
Seamless high-build surface; DFT 1–2 mm, up to 3 mm; excellent chemical and abrasion resistance
Hempafloor Self-Level 500
Self-smoothing, solvent-free, three-component epoxy system
Seamless high-build surface; DFT 2–5 mm; excellent chemical and abrasion resistance
Hempafloor Screed 230
Three-component, solvent-free industrial screed for refurbishing concrete and floor surfaces
Outstanding mechanical properties; economical with high durability; 5–10 mm DFT
Hempafloor Screed 250
Three-component, solvent-free industrial screed for refurbishing concrete and floor surfaces
Outstanding mechanical properties; heavy-duty dense surface; 5–15 mm DFT
Hempafloor Fill 100
Solvent-free, two-component epoxy filler
High strength, non-shrinking; up to 5 mm in one application; excellent chemical resistance
Hempafloor Fill 200
High-build, multi-component, solvent-free epoxy putty for filling bug holes and levelling
High strength, non-shrinking; up to 5 mm in one application; excellent chemical resistance
Hempel's Anti-slip 500 / 900
Dried silica sand broadcast into Hempafloor topcoats to create a non-slip surface
500 and 900 micron average particle sizes; flame-dried for purity; easy to use
Hempafloor Decorate 600
Two-component, solvent-free epoxy resin coating for decorative high-build applications. Gives a crystal-clear, hygienic high-build topcoat with strong mechanical properties, chemical resistance, and high impact and abrasion resistance.